PAS808M+KM24, SECURITY SYSTEM (SECOLINK)

Security system concept: modular system
Number of wired zones on the board: 8
Maximum number of zones in the system: 8
Number of PGM Outputs on the Panel: 3
Maximum number of PGM outputs in the system: 8
Number of user + installer codes: 5 + 1
Duress code: X1, X2, X3, X4 (where X4 = X4 + 1)
Service and user code recovery: Available
Zones: 4
Common corridor zone: Not available
Number of timers in the system: Not available
Maximum number of control panels/modules in the system: 7
Event log capacity (displayed on the control panel): 512
PSTN communicator: Available
Interface with transmitters and communicators: TTL Serial
Data Bus Protocol: KRBus
Reporting format to security service: Contact ID
Total maximum number of reporting phone numbers: 4
Number of phone numbers for reporting to the security service: up to 4
Number of phone numbers for calling the user’s phone: up to 4
Remote system programming via PSTN line: Not available
Roller sensor zone (detecting blind/roller shutter lifting): Not available
Vibration sensor zone: Available
Vibration sensor zone sensitivity (response time): 0.01 – 0.25 sec
Standard sensor zone sensitivity (response time): 0.1 – 2.5 sec
Types of sensor connection loops: NC, NO, NC/EOL, NO/EOL, NC/DEOL, NO/DEOL, vibration
Nominal / minimum / maximum control panel power supply voltage (AC): ~20V / ~16V / 22V
Maximum output current for +AUX / +BELL / -PGM / +PGM: +0.8A / +0.8A / -0.05A / +0.8A
Current measurement for battery charging, +BELL, +AUX: Not available
Faulty battery disconnection: Not available
Maximum battery charging current: +0.4A
The control panel disconnects the battery when the battery voltage drops below: 9.5V
Recommended backup power supply: 12V, 7Ah/20Hr
Product compliance with standards: EN50131, Grade 2
Overall dimensions (W×H): 145 mm × 77 mm
Environmental Compliance: ROHS
Operating temperature: from -10 °C to +50 °C
SECOLINK